ここから本文です
TWO:For her name also was Catherine.
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE:M. de Saint-Aubin, meanwhile, whose affairs, which grew worse and worse, were probably not improved by his mismanagement nor by the residence of his wife and daughter in Paris, stayed in Burgundy, coming every now and then to see them. Mlle. de Mars had left them, to the great grief of Flicit, who was now fourteen, and whom the Baron de Zurlauben, Colonel of the Swiss Guards, was most anxious to marry; but, as he was eighty years old, she declined his offer, and also another of a young widower who was only six-and-twenty, extremely handsome and agreeable, and had a large fortune.
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:Most of the rabid mob believed him to be so fanatical a republican that he wore the tricolour by night as well as by day; a few, who guessed the truth, admired his presence of mind and let him escape.

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:When the Bastille was destroyed, and the officers who were accused of nothing but defending the post entrusted to them were murdered, that prison [324] contained seven prisoners, of whom one was detained by the request of his family, four were forgers, one was an idiot, the other unknown. [102]
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.